Bilstein 4600 Conversion Kit for Ram 1500 DT 5th Gen Rebel/Off-Road Package (2019+) With Rough Country Upper Control Arms

This is our 2019+ 5th Gen Ram 1500 conversion kit using Bilstein 4600 struts and shocks.  Like all of our Bilstein products, this kit carries lifetime warranty against manufacturer defects.  This product is similar to the Bilstein 5100's, except the ride quality will be slightly softer with the 4600 option.

Includes:

• Bilstein 4600 front struts
• Front coil springs
• Front upper strut mounts
• Rear coil springs
• Bilstein 4600 rear shocks
• Rear isolators
• Upper strut spacer (if required)
• Optional: Front coil spring covers (Recommended for off-road or gravel use!)

Fits:

• 2019+ 5th Generation Ram 1500 DT (With Rebel or Off-Road Package)

*Optional Rear Spring - If you tow often, tow heavier weight occasionally or if you occasionally have payload in the box, we would recommend the rear spring upgrade.  The standard springs have excellent ride quality but do not handle weight well.  Our upgraded rear spring is designed to maintain ride quality while also improving your trucks ability to carry weight.

Note: If you choose to upgrade to the JBA Upper Control arms, please be aware that they are larger and much stronger than stock, and as a result they do have slightly reduced clearance between the tire and the upper balljoint.  If you choose to run wider than stock tires while still retaining the stock wheels, you may require wheel spacers to clear the upper control arm.  Most aftermarket wheels have decreased offset and will clear wider tires without any issues.

Note: All of our kits include the use of a programming tool which allows you to remove the "Immediate Air Suspension Service/Repair Required" message from the dashboard.  We don't use cheap and unreliable relays like our competitors.  Our programming tool is designed to modify the calibration of the BCM so that the truck thinks it never came with air suspension from the factory.  This is a permanent solution.

If you'd like to get a programming tool with your kit, please select "Yes, I'd like to borrow a programming tool on the option above".  This is a $300 refundable charge which will allow us to include the programming tool with your order.  We really try hard to keep costs down for our customers, so these are supplied on a deposit "rental" basis.  When you're done installing your kit and the programming is done, mail us back the programmer and we will happily refund you the $300 deposit.