Skip to content
Call Us Today! - 1-306-239-3939 | Mon - Fri: 9-5 PM
Call Us Today! - 1-306-239-3939 | Mon - Fri: 9-5 PM

Ram 1500 Conversion Kit (2013 - 2018)

Sold out
Original price $1,425.00 - Original price $1,728.00
Original price
Current price $1,425.00



Fits 2013 - 2018 Ram 1500 4x4 & 2wd (including Rebel)

This kit is an excellent choice for our customers who are looking to remove the air suspension and replace it with quality parts at an economical price.  This is an OEM quality replacement kit, which uses AirDelete front struts/springs, shocks and our Ram 1500 rear coils.


  • Front struts
  • Front coil springs
  • Front upper strut mounts
  • Rear coil springs
  • Rear shocks
  • Rear isolators
  • Upper strut spacer (if required)
  • OptionalFront coil spring covers (Recommended for off-road or gravel use!)


  • 2013-2018 Ram 1500
  • 2019-2020 Ram 1500 Classic (5 bolt wheel only)

*Fits all trim levels including Rebel*, Laramie, Longhorn and Limited.

*Optional Rear Spring - If you tow often, tow heavier weight occasionally or if you occasionally have payload in the box, we would recommend the rear spring upgrade.  The standard rear springs have excellent ride quality but do not handle weight well.  Our upgraded rear spring is designed to maintain ride quality while also improving your trucks ability to carry weight.

*Note: If your truck is a Rebel, your front ride height is already approximately 0.7” taller than the other trim levels.  Please choose the +0.7” option to maintain your stock front ride height.  Rear ride height is the same as non-Rebels.

Note: All of our kits include the use of a programming tool which allows you to remove the "Immediate Air Suspension Service/Repair Required" message from the dashboard.  We don't use cheap and unreliable relays like our competitors.  Our programming tool is designed to modify the calibration of the BCM so that the truck thinks it never came with air suspension from the factory.  This is a permanent solution.

If you'd like to get a programming tool with your kit, please select "Yes, I'd like to borrow a programming tool on the option above".  This is a $300 refundable charge which will allow us to include the programming tool with your order.  We really try hard to keep costs down for our customers, so these are supplied on a deposit "rental" basis.  When you're done installing your kit and the programming is done, mail us back the programmer and we will happily refund you the $300 deposit.